Best 2V0-16.25 Exam Dumps for the Preparation of Latest Exam Questions
2V0-16.25 Actual Questions 100% Same Braindumps with Actual Exam!
NEW QUESTION # 31
An administrator creates a cluster by joining a Medium sized VMware Cloud Foundation (VCF) Operations for Logs node to an existing Medium sized single-node deployment.
The secondary node of the cluster fails, degrading the functionality of VCF Operations for Logs.
What action should the administrator take to create a healthy active cluster?
- A. Rebuild the VCF Operations for Logs cluster secondary node and add an additional node to the cluster.
- B. Rebuild the VCF Operations for Logs cluster secondary node and place the cluster back into operation.
- C. Scale up the VCF Operations for Logs primary and secondary node to size Large.
- D. Scale up the VCF Operations for Logs primary and secondary node to size Extra Large.
Answer: B
Explanation:
In VMware Cloud Foundation (VCF)Operations for Logs, clusters require aminimum of three healthy nodesto function in a fully active and resilient state. When a cluster is deployed with only two nodes (primary
+ one secondary), the environment does not meet the minimum recommended requirement. If thesecondary node fails, the cluster becomes degraded and functionality is reduced.
The correct remediation is:
* Rebuild the failed secondary nodeso that the cluster can return to a healthy state.
* After rebuilding, the node must be rejoined to the primary using theManagement # Clusterworkflow (secure token, IP/hostname of primary, etc.).
Why not the other options?
* A. Scale up to Extra Large##Scaling up affects resource capacity (vCPU, RAM, disk) but does not solve the problem of missing nodes.
* B. Scale up to Large##Same reason as above, scaling up does not restore HA.
* D. Rebuild the secondary and add an additional node##While adding more nodes is a best practice (since HA clusters require three nodes), theminimum action requiredto restore a healthy active cluster is torebuild the failed node. Adding more nodes is optional for increased resiliency.
Therefore, the immediate and verified answer is torebuild the failed secondary node.
References:
VMware Cloud Foundation 9.0.2 Documentation -VCF Operations for Logs Clusters and Node Requirements VMware Cloud Foundation 9.0.2 Documentation -Joining and Rebuilding Worker Nodes in a Logs Cluster VMware Cloud Foundation 9.0.1 Documentation -High Availability VCF Operations for Logs requires minimum of three nodes (1 primary, 2 workers)
NEW QUESTION # 32
An administrator needs to ensure that only specific users can manage the virtual machines (VM) in a specific VMware vCenter folder.
Which three steps are required to accomplish this? (Choose three.)
- A. Assign the new role to the appropriate users/groups.
- B. Create a new role in vCenter with VM management permissions.
- C. Apply the role to the specific vCenter folder.
- D. Create a datastore cluster.
- E. Add the identity source to vCenter.
Answer: A,B,C
Explanation:
To ensure that only specific users can manage VMs in a specific VMware vCenter folder, the following three steps are required:
* Create a new role in vCenter with VM management permissions(Answer B):You must define a custom role tailored to managing VMs, which includes permissions such as powering on/off VMs, editing VM settings, and accessing consoles. This role must include the appropriate privileges under the
"Virtual machine" category in vCenter permissions.
* Apply the role to the specific vCenter folder(Answer C):The custom role needs to be applied directly to the target vCenter folder. This enables scope-based access control, where permissions are applied only to VMs within that folder.
* Assign the new role to the appropriate users/groups(Answer A):After creating the role and applying it to the folder, the role must be associated with the correct users or groups. This step uses the vCenter Server's identity source integration to assign roles.
Why the other options are incorrect:
* D. Add the identity source to vCenter:This is a prerequisite step for any role assignment but is not directly required in this specific scenario if the identity source is already configured.
* E. Create a datastore cluster:This is unrelated to managing VM access. Datastore clusters pertain to storage management and are not involved in user permissions or role assignments.
References:
VMware vSphere 9.0 Documentation # Role-based Access Control
VMware Docs: vSphere Permissions and User Management
VMware vSphere 9.0 PDF, section on vCenter Server Permissions Management.
NEW QUESTION # 33
An administrator enables the VMware Cloud Foundation (VCF) Operations orchestrator Plug-in for VMware vSphere Web Client service on a VCF Operations orchestrator appliance.
How many vSphere instances can be integrated in the vSphere Client through the VCF Operations orchestrator plug-in?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
TheVCF Operations Orchestrator Plug-in for VMware vSphere Web Clientallows orchestration workflows directly in the vSphere Client.
* However,only one vSphere instance can be integratedat a time with the vSphere Client via this plug-in.
* This limitation ensures a consistent, single orchestration endpoint per vSphere Client environment.
Other options (8, 10, 15) apply to scaling of vCenter or data sources but not to the Orchestrator Plug-in integration.
References:
VMware Cloud Foundation 9.0.1 -Orchestrator Plug-in Integration Limits
VMware Docs: vRealize Orchestrator Plug-in for vSphere Web Client
NEW QUESTION # 34
An administrator has enabled a Supervisor on a vSphere cluster. The DevOps team has requested access to vSphere resources such as virtual machines, storage, and networking using Kubernetes tooling. To meet this request, the administrator must provide secure, policy-based access that sets clear boundaries for compute and storage consumption.
Which function is provided by Supervisor services to support this use case?
- A. Grant DevOps users administrator access to the vCenter Server system namespace.
- B. Allow access to vSphere resources through Kubernetes in a configured Supervisor Namespace.
- C. Enable virtual machine backup using native Kubernetes ConfigMaps.
- D. Enable vSphere Replication between Supervisor Namespaces.
Answer: B
Explanation:
WhenSupervisor is enabled:
* It providesSupervisor Namespaces, which grant DevOps teamssecure, policy-based accessto vSphere resources (VMs, storage, networking) through Kubernetes tooling.
* This enforcesboundaries and quotasfor compute/storage consumption.
Other options:
* B. VM backup via ConfigMaps# Not a feature of Supervisor.
* C. vSphere Replication between namespaces# Not a Supervisor function.
* D. Granting administrator access to vCenter system namespace# Violates least-privilege security.
References:
VMware vSphere 9.0 -Supervisor Namespaces and Kubernetes Integration
VMware Docs: Using vSphere with Tanzu
NEW QUESTION # 35
An administrator is tasked to deploy a new eight-node VMware vSAN Express Storage Architecture (ESA) cluster.
What are three minimum requirements to accomplish this? (Choose three.)
- A. 10GbE network interfaces
- B. 128GB Memory
- C. 25GbE network interfaces
- D. PCIe flash device (NVMe)
- E. SAS solid-state disk (SSD)
- F. 256GB Memory
Answer: B,C,D
Explanation:
ForvSAN ESA (Express Storage Architecture), minimum requirements differ from OSA:
* 25GbE NICsare required to handle high-performance traffic. (C)
* NVMe PCIe flash devicesmust be used for storage. (D)
* 128GB Memory minimumper host is required. (F)
Other options:
* A. 10GbE# Only supported in vSAN OSA, not ESA.
* B. 256GB Memory# Recommended for large workloads, not minimum.
* E. SAS SSDs# Not supported in ESA; NVMe required.
References:
VMware Cloud Foundation 9.0 -vSAN ESA Hardware Requirements
VMware Docs: vSAN ESA Deployment Requirements
NEW QUESTION # 36
Which component must be added after an initial deployment of VMware vSphere Foundation (VVF) to provide a central location for logs collection?
- A. Fleet Manager
- B. VCF Operations
- C. VCF Operations for Networks
- D. VCF Operations for Logs
Answer: D
Explanation:
After deployingvSphere Foundation, to centralizelog collection and analysis, you must add:
* VCF Operations for Logs, which provides log ingestion, alerting, and centralized troubleshooting.
Other options:
* B. VCF Operations# Focuses on performance/capacity, not log collection.
* C. VCF Operations for Networks# Focuses on networking insights.
* D. Fleet Manager# Used for multi-instance management, not logging.
References:
VMware Cloud Foundation 9.0 -Extending VCF with Logs
VMware Docs: vRealize Log Insight Deployment
NEW QUESTION # 37
Which action allows a Content Library in VMware vSphere Foundation (VVF) to be accessed by other VMware vCenter Server instances?
- A. Enable automatic synchronization.
- B. Store the library on a vSAN datastore.
- C. Store the library on a shared NFS datastore.
- D. Publish the Content Library.
Answer: D
Explanation:
To allow a Content Library in vSphere Foundation to be accessed byother vCenter Server instances, it must bepublished.
* Once published, other vCenters cansubscribeto the library.
* Synchronization ensures subscribed vCenters receive updated templates and ISOs.
Other options:
* A. Automatic synchronization# Works only for subscribers, not for publishing.
* B. Store on vSAN datastore# Storage choice does not enable multi-vCenter access.
* C. Store on NFS datastore# Similar, datastore type does not matter.
References:
VMware vSphere 9.0 -Content Library Publishing and Subscription
VMware Docs: Publishing and Subscribing Content Libraries
NEW QUESTION # 38
An administrator has licensed vSphere components in Connected mode and then switched to Disconnected mode to meet the company security restrictions, which cannot be violated.
What must the administrator do to ensure the VMware vSphere Foundation license remains valid?
- A. Nothing. The license is perpetual.
- B. Switch to Connected mode, validate that VCF Operations has downloaded a new license file from VCF Business Services console, and then switch to Disconnected mode at least once every 365 days.
- C. Manually exchange a registration and license file between the VCF Operations instance and the VCF Business Services console at least once every 180 days.
- D. Provide an internet connection to VCF Operations, then download a new license file from the VCF Business Services console at least once every 180 days.
Answer: C
Explanation:
ForDisconnected mode licensingin vSphere Foundation:
* Administrators must manuallyexport a registration file, upload it to theVCF Business Services console, and thenimport the license fileback into VCF Operations.
* This process must be repeatedevery 180 daysto maintain license validity.
Other options:
* A. Switch to Connected mode once every 365 days# Incorrect; 180-day requirement.
* C. License is perpetual# Not correct; subscription-based license requires refresh.
* D. Provide internet connection every 180 days# Violates security restriction (Disconnected mode is required).
References:
VMware Cloud Foundation 9.0 -Connected and Disconnected Licensing Modes VMware Docs: [vSphere Foundation Licensing with VCF Business Services]
NEW QUESTION # 39
Which scenario demonstrates the benefit of server consolidation using VMware server virtualization?
- A. Running multiple independent machines on a single physical host.
- B. Providing protection against ransomware attacks.
- C. Performing load balancing between web servers.
- D. Automating the deployment of application clusters.
Answer: A
Explanation:
Thecore benefit of server consolidation using VMware server virtualizationis the ability to runmultiple independent virtual machines (VMs)on asingle physical host.
* This increases hardware utilization, reduces physical server sprawl, and cuts operational costs.
* A. Load balancing# Achieved through features like DRS, not basic server consolidation.
* C. Ransomware protection# Achieved through security features and backups, not consolidation.
* D. Automating application clusters# A benefit of orchestration tools, not consolidation.
References:
VMware vSphere 9.0 -Server Consolidation Benefits
VMware Docs: VMware Virtualization Fundamentals
NEW QUESTION # 40
An administrator is tasked with adding a 96-core VMware ESX host to a VMware vSphere Foundation (VVF)
9.0 vCenter cluster. The vCenter has been previously licensed for 1024 cores and the existing hosts equal 960 cores. The administrator adds the host to the vCenter cluster and places the cluster back into production.
What issue will occur if the administrator performs no additional actions to this vCenter?
- A. No issue will occur. The new host was added to the vCenter cluster successfully and will operate for the valid period of the applied license.
- B. The new ESX host will operate in evaluation mode until more capacity is added to the license to license the host. If the host is not licensed when the evaluation period expires, the host will be limited to 64 cores until 32 cores or greater is added to the license.
- C. The new ESX host will operate in evaluation mode until more capacity is added to the license to license the host. If the host is not licensed when the evaluation period expires, it is disconnected from the vCenter instance.
- D. The new ESX host has been limited to 64 cores until more capacity is added to the license to license the host. Once 32 cores or greater is added to the license, the full 96 cores of the new host will be useable.
Answer: C
Explanation:
ThevSphere Foundation 9.0 licensing modelusesper-core licensing.
* Current license covers1024 cores.
* Existing hosts =960 cores, leaving64 cores licensed.
* Adding a96-core host# 32 cores exceed the license.
Result:
* The new host runs inevaluation mode.
* If not licensed after the evaluation period, the host isdisconnected from vCenter.
Other options:
* A. Limited to 64 cores# Not how VMware licensing enforcement works.
* B. Limited to 64 cores until license upgrade# Incorrect; VMware does not partially disable cores.
* D. No issue# Incorrect; licensing compliance will cause issues.
References:
VMware Licensing Guide -Per-Core Licensing Enforcement
VMware Docs: vSphere License Enforcement
NEW QUESTION # 41
An administrator is tasked with deploying a VMware Cloud Foundation (VCF) Operations for Logs appliance into vSphere Foundation.
After downloading the .ova, which component does the administrator use to deploy the file?
- A. VCF Automation
- B. VCF Fleet Management
- C. vSphere Client
- D. VCF Operations
Answer: C
Explanation:
To deploy theVCF Operations for Logs OVA appliance:
* ThevSphere Clientis used to deploy.ovaand.ovftemplates directly into a vCenter environment.
* After deployment, the appliance can be configured and integrated with VCF.
Other options:
* A. VCF Fleet Management# Used for multi-instance management, not OVA deployment.
* C. VCF Automation# Provides automation workflows, not appliance deployment.
* D. VCF Operations# Monitoring and analytics platform, not used for OVA installs.
References:
VMware Cloud Foundation 9.0 -Deploying VCF Operations for Logs Appliance VMware Docs: Deploy OVF/OVA Templates Using vSphere Client
NEW QUESTION # 42
An administrator is tasked to configure Service Discovery in VMware Cloud Foundation (VCF) Operations for Linux Guest Operating Systems. For security reasons a non-root user needs to be used and all required steps for the Guest OS have already been completed.
What are the two steps the administrator needs to take? (Choose two.)
- A. Activate Service Discovery in the required VCF Operations vCenter instance.
- B. Activate Service Discovery in the required VCF Operations NSX instance.
- C. Deactivate Use Sudo in the Service Discovery instance.
- D. Activate Use Sudo in the Service Discovery instance.
- E. Activate Use Sudo in the vCenter instance.
Answer: A,D
Explanation:
To configureService Discovery for Linux Guest OSin VCF Operations using anon-root user:
* Activate Service Discoveryin thevCenter instanceto start discovery operations. (B)
* Enable Use Sudoin the Service Discovery instance so the non-root account can run necessary privileged commands. (E) Other options:
* A. Activate Use Sudo in vCenter instance# Wrong, this is configured in Service Discovery.
* C. Activate in NSX instance# Not applicable; Service Discovery integrates with vCenter.
* D. Deactivate Use Sudo# Opposite of required security setting.
References:
VMware Cloud Foundation 9.0 -Service Discovery Setup
VMware Docs: Service Discovery for VMs in vRealize Operations
NEW QUESTION # 43
An administrator is tasked to implement a new iSCSI storage for a new cluster.
The following information was provided to the administrator:
* iSCSI storage controller IPs are all in the same subnet.
* Multipathing should be used.
* Storage supports Asymmetric Logical Unit Access (ALUA).
* Should be configured for high performance.
Which are the four required steps to configure this on an ESX host? (Choose four.)
- A. Configure 1 vSwitch with 2 Uplinks.
- B. Configure two unbound VMkernel ports.
- C. Set Path Selection Policy (PSP) to Most Recently Used (MRU).
- D. Configure two bound VMkernel ports.
- E. Configure 2 vSwitch with 1 Uplink.
- F. Add iSCSI software adapter.
- G. Add NVMe over TCP software adapter.
- H. Set Path Selection Policy (PSP) to Round Robin (RR).
Answer: A,D,F,H
Explanation:
ForiSCSI multipathing with ALUAandhigh performancein ESXi:
* 1 vSwitch with 2 Uplinks# Standard design for redundancy and multipathing. (B)
* Add iSCSI software adapter# Required to connect to storage. (E)
* Configure two bound VMkernel ports# Ensures multipathing (one per uplink). (G)
* Set PSP to Round Robin (RR)# Optimizes I/O balancing across multiple paths. (F) Other options:
* A. 2 vSwitches with 1 Uplink each# Not recommended, complicates multipathing.
* C. NVMe over TCP# Not relevant, storage is iSCSI.
* D. MRU policy# Legacy, not high performance.
* H. Unbound VMkernel ports# Used for software iSCSI port binding, but "bound" VMkernel ports are required for multipathing.
References:
VMware vSphere 9.0 -iSCSI Configuration with Multipathing
VMware KB 2038869 -Configuring Round Robin PSP with iSCSI
NEW QUESTION # 44
An administrator has been tasked to create a virtual machine (VM) into a VMware vCenter Supervisor Namespace in an existing VMware vSphere Foundation (VVF) deployment.
How would the administrator create the VM?
- A. Deploy using the vSphere Client.
- B. Create a YAML file and deploy using kubectl.
- C. Log in to VCF Automation Service Broker and select the "Create a VM" catalog item.
- D. Use VCF CLI to deploy the VM.
Answer: B
Explanation:
In aVMware vSphere Foundation (VVF) deploymentwithvCenter Supervisor Namespaces enabled, the method for creating VMs inside a Supervisor Namespace relies on thevSphere VM Service.
* TheVM Serviceexposes VMs as Kubernetes-native objects that are managed usingkubectl.
* Administrators (or DevOps engineers with appropriate permissions) must write aVM YAML manifest file, which specifies parameters such as apiVersion, kind: VirtualMachine, spec.imageName, spec.
className, spec.storageClass, and spec.networkInterfaces.
* The YAML manifest is thenapplied with kubectlto the Supervisor context.
This approach is documented as the supported method:
"As a DevOps engineer, provision a VM and its guest OS in a declarative manner by writing VM deployment specifications in a Kubernetes YAML file." Why the other options are incorrect:
* B. Deploy using the vSphere Client##The vSphere Client is used to configure Namespaces, permissions, and VM classes, butactual VM creation in Supervisor Namespaces is done via kubectl
+ YAML.
* C. Use VCF CLI to deploy the VM##VCF CLI (kubectl vsphere login) is used only to authenticate and obtain context, not to create VMs.
* D. Log in to VCF Automation Service Broker##This is used for vRealize Automation/Aria Automation integration, not for direct Supervisor Namespace VM creation.
References:
VMware Cloud Foundation 9.0.4 Documentation -Deploy a Virtual Machine on a Namespace in a Supervisor VMware Cloud Foundation 9.0.4 Documentation -Prepare a VM YAML file for Supervisor VMware Docs: VM Service in vSphere with Tanzu
NEW QUESTION # 45
An administrator has successfully deployed the VMware Cloud Foundation (VCF) Installer appliance to begin a new VMware vSphere Foundation (VVF) deployment. The VMware ESX hosts are powered on and meet all hardware and connectivity prerequisites.
What is the next step to begin deploying vSphere Foundation?
- A. Launch the VCF Installer deployment wizard.
- B. Install SDDC Manager using the VCF Installer.
- C. Enable SSH on all ESX hosts.
- D. Manually deploy the vCenter Server Appliance.
Answer: A
Explanation:
After successfully deploying theVCF Installer appliance, and ensuring ESXi hosts are powered on and meet prerequisites, thenext stepis to:
* Launch the VCF Installer deployment wizard, which guides administrators through host onboarding, vCenter deployment, and cluster setup forvSphere Foundation.
Other options:
* A. Enable SSH on all ESX hosts# Not required unless troubleshooting.
* C. Install SDDC Manager using VCF Installer# Only applies to full Cloud Foundation, not vSphere Foundation deployment.
* D. Manually deploy vCenter Server Appliance# The Installer wizard automates this.
References:
VMware Cloud Foundation 9.0 -Using VCF Installer for vSphere Foundation VMware Docs: VCF Installer Deployment Workflow
NEW QUESTION # 46
......
VMware 2V0-16.25 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
2V0-16.25 Study Material, Preparation Guide and PDF Download: https://examcollection.prep4king.com/2V0-16.25-latest-questions.html
