Prep and try our 6006-1 valid and latest training questions & answers

A customer uses a S8510 server with a Media Gateway G650. No more circuit pack slots are left and the customer has already ordered and received the necessary components for adding additional DCP phones to the system, including a new G850.
Which three tasks need to be performed while installing the additional equipment?
(Choose three)

• A. The new digital line card must be installed din slot 2 of new G650
• B. Cable the two G850 carries with a TDM/LAN Bus Extender cable.
• C. Add additional 2GB of RAM to the S8510 server.
• D. Remove the right TDM/LAN bus terminal from the bottom G850 carrier and install the bus terminator at the left end of the TDM/LAN bus on the G650 carrier directly above.
• E. Set the proper carrier address ID for the second G650 carrier.

A technician is testing calls from IP phones at a remote location on a G450/LSP to main location served by S83XX/G450 over the WAN. Busy tones are received when multiple calls between the two locations are already active. The network regions and G 711 and G 729 codec set have been set up.
Which two steps must be taken to ensure the branch IP phones are using the minimum WAN bandwidth when calling main location stations? (Choose two)

• A. Verify calls between NR1 and NR2 use G729 codec in IP-network-region 1 form
• B. Assign branch IP phones to the G450 LSP as its call server in IP-network-region-2 form.
• C. Assign G.729 as primary codec in station form for the branch IP phones.
• D. Use the IP-network map form to assign the branch IP phones to network region 2.
• E. Create a third codec Set and assign to the G450 gateway in IP-network-region 2 form.

What is the procedure to upgrade a duplicated S8xxx-series server?

• A. Upgrade the active server first, which automatically upgrades the standby server.
• B. Upgrade the standby server first, which automatically upgrades the active server.
• C. Upgrade the standby server first, and then upgrade the active.
• D. Upgrade the active first, and then upgrade the standby.

Which two statements about IP phones firmware updates are true? (Choose two)

• A. A tftp, or https server are required for IP Phone firmware upgrades.
• B. An upgrade script file and the settings files are required to perform an upgrade on IP phones.
• C. SIP Phones download script files, setting files, and firmware from tftp servers only.
• D. The S8300 media server offers fttp capability for IP phone Upgrades.

A customer would like to have an additional menu language available for the 9630 phones.
Which statement describes what has to be done to provide this language?

• A. The menu language file is on the phone's file server. The local display language parameter has to be activated in the 46xx settings bd file. Reboot the affected phones.
• B. A multi-language firmware package must be loaded into the 9630 phones. Provide this package on the phone's file server for download. Reboot the affected phones.
• C. Go to the 9630 phone menu settings and enable the parameter Multilanguage support. Reboot the affected phones.
• D. Change the parameter display language in the station's form to user-defined. Reboot the affected phones.