Authentic HPE0-J68 Dumps With 100% Passing Rate Practice Tests Dumps
HP HPE0-J68 Real Exam Questions Guaranteed Updated Dump from Prep4King
What is the cost of the HP HPE0-J68 Exam
The cost of the HP HPE0-J68 exam is $250 USD.
NEW QUESTION # 95
Which feature allows HPE Primera, HPE Nimble, and HPE XP arrays to work with third-party management tools?
- A. REST API
- B. Data Protection Manager (DPM)
- C. Service Processor
- D. StoreServe Management Console (SSMC)
Answer: A
NEW QUESTION # 96
A customer need to server 40TB via file protocols including SMB and FTP to a board range of client operating system in one location .security protocol dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution you recommend?
- A. HPE 3PAR 8200 using self-encrypting drive with 3PAR file persona
- B. HPE StoreOnce 5500with data in fight encryption .
- C. HPE MSA 2052 storage with HPE StoreEasy 3850 Gateway
- D. HPE XP7 storage with encryption ready disk adapters
Answer: A
NEW QUESTION # 97
During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)
- A. Loss of full-mesh cluster interconnect
- B. Loss of persistent cache
- C. Firmware upgrade
- D. Node maintenance or failure
- E. B-series SAN switch upgrades
Answer: C,D
NEW QUESTION # 98
Which technology is used in a B-series SAN switch to prevent communicate between unauthorized device?
- A. VSAN
- B. Port isolation
- C. Zoning
- D. IVR
Answer: B
NEW QUESTION # 99
Which statement describes HPE StoreVirtual Network RAID functionality?
- A. Redundancy is managed on a per-volume basis.
- B. Network RAID 10 requires an even number of storage nodes.
- C. With Network RAID 10+2 data is striped and mirrored across two or more storage systems.
- D. Volumes remain available if an odd number of nodes are available.
Answer: A
Explanation:
Redundancy is managed on a per volume basis to improve storage utilization and to remove any simgle point of failure.
NEW QUESTION # 100
Where does HPE 3PAR StoreServ Data-at-Rest Encryption occur?
- A. ASIC
- B. physical disk
- C. host
- D. processor
Answer: B
NEW QUESTION # 101
During Technology workshop ,the customer asks about different between converged and fibre channel switches. What would be a benefits of using flex fabric switches in a fibre channel storage environment?
- A. Support for six Ethernet and two fibre channel ,or six Ethernet and two ISCSI or eight Ethernet adapters per server.
- B. In-flight compression and encryption provides efficient link utilization and security
- C. Support for combining multiple physical switches in to one virtual switch with a single IP address
- D. Zones can be configured for QoS with high ,medium, and low priorities within a fabric on a zone by zone basic
Answer: C
NEW QUESTION # 102
A customer implemented the HPE StoreEver MSL6480 Tape Library.
Which HPE Software can the system administrator use to check the health of the library and monitor its utilization?
- A. InfoSight
- B. StoreServe TapeAssure Advanced
- C. StoreEver Data Verification
- D. OneView
Answer: B
NEW QUESTION # 103
You have proposed a Primera array to a customer for new primary storage. The customer currently has an older 3PAR array that they will continue to use moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)
- A. 2-port 10 Gb Ethernet Adapter (NIC) is required
- B. 4-port 1 Gb Ethernet Adapter (NIC) is required in each array
- C. Target drive type must match source drive type
- D. RMC 6.2 is required
- E. No license is required
Answer: B,D
NEW QUESTION # 104
You are designing a new HPE 3PAR StoreServ solution.
Which HPE tool allows editing the Customer Intent Document and adding specific instructions for packing?
- A. NinjaSTARS
- B. SAF Collect
- C. One Config Advanced
- D. Storage Sizing Tool
Answer: C
NEW QUESTION # 105
A customer successfully implemented an HPE Primera solution.
Which tool can be used to verify performance counters, such as IOPS, match customer requirements?
- A. NinjaCrawler
- B. Primera on-node management GUI
- C. OneView
- D. Recovery Manager Central
Answer: B
NEW QUESTION # 106
An existing Nimble customer is interested in adding storage to their environment to store his Backups, but has a constrained budget and limited personal .The solution must scale to allow for substantial growth over the next five years?
- A. Nimble cloud volume
- B. Nimble SF series
- C. Nimble CS series
- D. Nimble AF series
Answer: D
NEW QUESTION # 107
Which statement is true when defining object storage ?
- A. It is most suited for unstructured data and characterized by file share protocols like NFS
- B. suited for database It is most and characterized by containers or buckets
- C. It is most suited for sharing files and characterized by volumes
- D. It is most suited for unstructured data and characterized by containers or buckets
Answer: D
NEW QUESTION # 108
A customer asks you for a recommendation on setting up their new StoreOnce appliance. They plan to use NetBackup and need the highest performance setup they can get. Their local hosts are connected via FC and the rest are connected via a WAN.
Which backup target type should you recommend?
- A. Catalyst
- B. S3
- C. CIFS
- D. VTL
Answer: D
NEW QUESTION # 109
Users are complaining about poor performance with their Data Warehouse application.
What is an effective solution to increase their performance at minimal cost?
- A. HPE 3PAR Dynamic Optimization
- B. HPE 3PAR Priority Optimization
- C. HPE 3PAR Adaptive Flash Cache
- D. HPE 3PAR Adaptive Optimization
Answer: B
NEW QUESTION # 110
Which actions can be done within InfoSight Cross-Stack Analytics for VMware and Hyper-V? (Choose two.)
- A. Modify administrative privileges
- B. Find noisy neighbors
- C. Review backup schedules
- D. Locate inactive VMs
- E. View replication policies
Answer: B,D
NEW QUESTION # 111
You are designing a new storage environment for a customer. They need good performance, but need to keep costs to a minimum.
They have a very limited staff, and staff is concerned about learning new technologies. You plan to recommend a Nimble HF20 solution.
Which storage connectivity components should you recommend?
- A. FlexFabric switches, Nimble iSCSI card. FC adapters for servers
- B. Ethernet switches, Nimble iSCSI card, dedicated NICs for servers
- C. FC switches, Nimble FC card, FC adapters for servers
- D. Ethernet switches, Nimble FC card, dedicated FC for servers
Answer: B
NEW QUESTION # 112
A customer currently has a CS1000H and wants to upgrade to a CS3000.
What must be considered before upgrading?
- A. A capacity upgrade to a fully populated array has to be performed first.
- B. A controller upgrade to a CS1000F has to be performed first.
- C. Timeless storage support is not offered for CS1000H entry-level systems.
- D. This upgrade is disruptive and needs planned downtime.
Answer: A
NEW QUESTION # 113
Refer to the exhibit.
You are designing a new Primera solution and demonstrating performance numbers to the customer. The customer reviews the configuration and requests a change to the configuration that will increase Random Write IOPS.
Which action will satisfy the customer request?
- A. Upgrade the HPE Primera base model
- B. Add more disks of smaller capacity
- C. Add more FC Ports
- D. Change to larger SSDs
Answer: D
NEW QUESTION # 114
Which resource provides configurations for HPE tested and referenced configurations in a software-defined storage environment?
- A. HPE Storage Sizer
- B. One Config Advanced
- C. NinjaStars
- D. StoreVirtual VSA Ready Nodes
Answer: D
Explanation:
HPE StoreVirtual VSA Ready Nodes-HPE tested reference configurations on HPE ProLiant servers that address typical virtualization and remote office use cases, and deployment of converged solutions.
NEW QUESTION # 115
During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches. Which port mode must be set enable communication between the switches?
- A. N_PORT
- B. E_PORT (Correct)
- C. F_PORT
- D. FL_PORT (WRONG)
Answer: B
NEW QUESTION # 116
A customer is planning to connect a new HPE 3PAR StoreServ system to its existing Synergy based composable infrastructure via direct-attach.
Which tool would be used to manage the storage?
- A. HPE Synergy Composer
- B. HPE SAN Network Advisor
- C. HPE Synergy Image Streamer
- D. HPE InfoSight for 3PAR
Answer: A
NEW QUESTION # 117
Match the data access type in a SAN fabric to the correct description.
Answer:
Explanation:
NEW QUESTION # 118
You have proposed a Primera array to a customer for primary storage. The customer currently has an older HPE 3PAR array and will continue to use it moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)
- A. Check that the 3PAR OS version is supported
- B. 4-port 1 Gb Ethernet Adapter (NIC) is required in each array
- C. Target drive type must match source drive type
- D. Required license must be provided
- E. RMC 6.2
- F. 2-port 10 Gb Ethernet Adapter (NIC) is required in each array
Answer: B,D
NEW QUESTION # 119
Match each HPE storage solution to its use case.
Answer:
Explanation:
NEW QUESTION # 120
......
Verified Pass HPE0-J68 Exam in First Attempt Guaranteed: https://examcollection.prep4king.com/HPE0-J68-latest-questions.html
